Stormwater Management

The stormwater management program is a state-mandated program delegated to Harford County on September 6, 1984. Historically, runoff from development was only managed during the construction phase of a project through sediment control practices. Stormwater management structures, or best management practices (BMPs), were developed to manage stormwater runoff after the construction phase of the project has been completed. Examples of BMPs are infiltration, flow attenuation, retention, extended detention and detention.

New development & redevelopment


All new development and redevelopment in Harford County must address stormwater management by obtaining either an exemption or a waiver from stormwater management requirements, or by providing management through either environmental site design (ESD) or construction of a BMP. The Bureau of Stormwater Management is responsible for reviewing and approving stormwater management waivers, exemptions, and design plans.

Development that requires stormwater management must use ESD to the maximum extent practical to address water quality, groundwater recharge and channel protection. In addition, peak discharges must be controlled to a level equal to or less than the existing runoff for the 10-year storm event. Areas within two watersheds in the county - the Bynum Run watershed above Business Route 1 and the Wildcat Branch watershed above Reckord Road - must also provide 100-year management.

There are approximately 1,000 BMPs in Harford County. As part of the stormwater management program, an engineer in charge is required to inspect each BMP during construction and determine whether the facility is constructed to specifications. The Bureau of Stormwater Management is also required to conduct maintenance inspections for each BMP on a tri-annual basis. The Maryland Department of the Environment (MDE) reviews Harford County's Stormwater Management Program on a tri-ennial basis to determine if the county's program is in compliance with the mandated requirements.
  1. Division of Construction Management

    Physical Address
    212 S. Bond Street
    1st Floor
    Bel Air, MD 21014

    Phone: 410-638-3217